Smaller Font Default Font Larger Font

You are here:

PrintEmail
In Stock

Human ROR1 Lentivirus, Full-length Gene in Lentivector, Pre-packaged Lentiviral Particles

Product ID: LTV-ROR1 (SKU#: LTV0043)

For Bulk Order: Call for price

Price:
$1,490.00
Size

Selection Marker

Description

ROR1 (receptor tyrosine kinase-like orphan receptor 1), also known as NTRKR1 (neurotrophic tyrosine kinase, receptor-related 1), is a single-pass type I transmembrane glycoprotein that belongs to the ROR subfamily of the tyrosine protein kinase family. The ROR subfamily members, ROR1 and ROR2, are tyrosine kinase receptors important in regulating skeletal and neuronal development, cell migration and cell polarity. Each ROR member contains 1 FZ (frizzled) domain, 1 Ig (immunoglobulin)-like C2-type domain, and 1 kringle domain in the extracellular region and 1 protein kinase domain in the cytoplasmic region. ROR1 is highly expressed during early embryonic development but expressed at very low levels in adult tissues. Increased expression of this gene is associated with various hematological malignancies of both lymphoid and myeloid origins as well as in melanoma. ROR1 is a pseudokinase that lacks catalytic activity and may interact with the non-canonical Wnt signalling pathway. ROR1 modulates neurite growth in the central nervous system. ROR1 may play a role in the survival of melanoma cells and regulate EMT and tumor metastasis.

 

ROR1 (receptor tyrosine kinase-like orphan receptor 1), also known as NTRKR1 (neurotrophic tyrosine kinase, receptor-related 1), is a single-pass type I transmembrane glycoprotein that belongs to the ROR subfamily of the tyrosine protein kinase family. The ROR subfamily members, ROR1 and ROR2, are tyrosine kinase receptors important in regulating skeletal and neuronal development, cell migration and cell polarity. Each ROR member contains 1 FZ (frizzled) domain, 1 Ig (immunoglobulin)-like C2-type domain, and 1 kringle domain in the extracellular region and 1 protein kinase domain in the cytoplasmic region. ROR1 is highly expressed during early embryonic development but expressed at very low levels in adult tissues. Increased expression of this gene is associated with various hematological malignancies of both lymphoid and myeloid origins as well as in melanoma. ROR1 is a pseudokinase that lacks catalytic activity and may interact with the non-canonical Wnt signalling pathway. ROR1 modulates neurite growth in the central nervous system. ROR1 may play a role in the survival of melanoma cells and regulate EMT and tumor metastasis.

 

Product Details

 

Gene Symbol: NTRKR1; dJ537F10.1

 

NCBI Gene ID: 4919

 

Uniprot Entry: Q01973

 

Construct Details: Full length human ROR1 gene is subcloned into the Lentiviral expression vector pLTC with an upstream CMV promoter, which can be used for both transient and stable expression in mammalian cells.  It can be co-transfected with the LentiPAK DNA mix (SKU# LP-001) into HEK293 cells to produce high titer lentiviral particles.

 

Vector Type: pLTC (lentiviral expression vector containing a heterologous CMV promoter, see the vector map above)

 

Gene Insert Sequence:  

ATGCACCGGCCGCGCCGCCGCGGGACGCGCCCGCCGCTCCTGGCGCTGCTGGCCGCGCTGCTGCTGGCCGCACGCGGGGC

TGCTGCCCAAGAAACAGAGCTGTCAGTCAGTGCTGAATTAGTGCCTACCTCATCATGGAACATCTCAAGTGAACTCAACA

AAGATTCTTACCTGACCCTCGATGAACCAATGAATAACATCACCACGTCTCTGGGCCAGACAGCAGAACTGCACTGCAAA

GTCTCTGGGAATCCACCTCCCACCATCCGCTGGTTCAAAAATGATGCTCCTGTGGTCCAGGAGCCCCGGAGGCTCTCCTT

TCGGTCCACCATCTATGGCTCTCGGCTGCGGATTAGAAACCTCGACACCACAGACACAGGCTACTTCCAGTGCGTGGCAA

CAAACGGCAAGGAGGTGGTTTCTTCCACTGGAGTCTTGTTTGTCAAGTTTGGCCCCCCTCCCACTGCAAGTCCAGGATAC

TCAGATGAGTATGAAGAAGATGGATTCTGTCAGCCATACAGAGGGATTGCATGTGCAAGATTTATTGGCAACCGCACCGT

CTATATGGAGTCTTTGCACATGCAAGGGGAAATAGAAAATCAGATCACAGCTGCCTTCACTATGATTGGCACTTCCAGTC

ACTTATCTGATAAGTGTTCTCAGTTCGCCATTCCTTCCCTGTGCCACTATGCCTTCCCGTACTGCGATGAAACTTCATCC

GTCCCAAAGCCCCGTGACTTGTGTCGCGATGAATGTGAAATCCTGGAGAATGTCCTGTGTCAAACAGAGTACATTTTTGC

AAGATCAAATCCCATGATTCTGATGAGGCTGAAACTGCCAAACTGTGAAGATCTCCCCCAGCCAGAGAGCCCAGAAGCTG

CGAACTGTATCCGGATTGGAATTCCCATGGCAGATCCTATAAATAAAAATCACAAGTGTTATAACAGCACAGGTGTGGAC

TACCGGGGGACCGTCAGTGTGACCAAATCAGGGCGCCAGTGCCAGCCATGGAATTCCCAGTATCCCCACACACACACTTT

CACCGCCCTTCGTTTCCCAGAGCTGAATGGAGGCCATTCCTACTGCCGCAACCCAGGGAATCAAAAGGAAGCTCCCTGGT

GCTTCACCTTGGATGAAAACTTTAAGTCTGATCTGTGTGACATCCCAGCGTGCGATTCAAAGGATTCCAAGGAGAAGAAT

AAAATGGAAATCCTGTACATACTAGTGCCAAGTGTGGCCATTCCCCTGGCCATTGCTTTACTCTTCTTCTTCATTTGCGT

CTGTCGGAATAACCAGAAGTCATCGTCGGCACCAGTCCAGAGGCAACCAAAACACGTCAGAGGTCAAAATGTAGAGATGT

CAATGCTGAATGCATATAAACCCAAGAGCAAGGCTAAAGAGCTACCTCTTTCTGCTGTACGCTTTATGGAAGAATTGGGT

GAGTGTGCCTTTGGAAAAATCTATAAAGGCCATCTCTATCTCCCAGGCATGGACCATGCTCAGCTGGTTGCTATCAAGAC

CTTGAAAGACTATAACAACCCCCAGCAATGGACGGAATTTCAACAAGAAGCCTCCCTAATGGCAGAACTGCACCACCCCA

ATATTGTCTGCCTTCTAGGTGCCGTCACTCAGGAACAACCTGTGTGCATGCTTTTTGAGTATATTAATCAGGGGGATCTC

CATGAGTTCCTCATCATGAGATCCCCACACTCTGATGTTGGCTGCAGCAGTGATGAAGATGGGACTGTGAAATCCAGCCT

GGACCACGGAGATTTTCTGCACATTGCAATTCAGATTGCAGCTGGCATGGAATACCTGTCTAGTCACTTCTTTGTCCACA

AGGACCTTGCAGCTCGCAATATTTTAATCGGAGAGCAACTTCATGTAAAGATTTCAGACTTGGGGCTTTCCAGAGAAATT

TACTCCGCTGATTACTACAGGGTCCAGAGTAAGTCCTTGCTGCCCATTCGCTGGATGCCCCCTGAAGCCATCATGTATGG

CAAATTCTCTTCTGATTCAGATATCTGGTCCTTTGGGGTTGTCTTGTGGGAGATTTTCAGTTTTGGACTCCAGCCATATT

ATGGATTCAGTAACCAGGAAGTGATTGAGATGGTGAGAAAACGGCAGCTCTTACCATGCTCTGAAGACTGCCCACCCAGA

ATGTACAGCCTCATGACAGAGTGCTGGAATGAGATTCCTTCTAGGAGACCAAGATTTAAAGATATTCACGTCCGGCTTCG

GTCCTGGGAGGGACTCTCAAGTCACACAAGCTCTACTACTCCTTCAGGGGGAAATGCCACCACACAGACAACCTCCCTCA

GTGCCAGCCCAGTGAGTAATCTCAGTAACCCCAGATATCCTAATTACATGTTCCCGAGCCAGGGTATTACACCACAGGGC

CAGATTGCTGGTTTCATTGGCCCGCCAATACCTCAGAACCAGCGATTCATTCCCATCAATGGATACCCAATACCTCCTGG

ATATGCAGCGTTTCCAGCTGCCCACTACCAGCCAACAGGTCCTCCCAGAGTGATTCAGCACTGCCCACCTCCCAAGAGTC

GGTCCCCAAGCAGTGCCAGTGGGTCGACTAGCACTGGCCATGTGACTAGCTTGCCCTCATCAGGATCCAATCAGGAAGCA

AATATTCCTTTACTACCACACATGTCAATTCCAAATCATCCTGGTGGAATGGGTATCACCGTTTTTGGCAACAAATCTCA

AAAACCCTACAAAATTGACTCAAAGCAAGCATCTTTACTAGGAGACGCCAATATTCATGGACACACCGAATCTATGATTT

CTGCAGAACTGTAA

 

Primers: Gene insert coding sequence can be confirmed by following primers:

(a) forward (or 5'-end) primer: 5’-CAAATGGGCGGTAGGCGTG-3’;

(b) reverse (or 3'-end) primer: 5’-CGGGAAGCAATAGCATGATA-3’

 

 

Note: The sequence may vary due to the naturally occurring variants or mutations, such as single nucleotide polymorphism, or the artifact during PCR amplification.  High fidelity PCR systems should always be used. 

 

Formulation: Lentivector encoded and pre-packaged viral particles (typical titer 106 - 107 IFU/ml) in the conditional medium (serum-free) from HEK293 cells that have been transfected with the lentivector gene clone and the LentiPAK DNA mix

 

 

 

FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.

Important Safety Information: With the safety features in place, our lentiviral vectors and viral particles can be employed in standard Biosafety Level 2 tissue culture facilities and should be treated with the same level of caution as any other potentially infectious agent. Any investigator who purchases our lentiviral/retroviral products & services is responsible for following Biosafety Level 2 requirements on the handling of viral particles. For more information on Biosafety Level 2 agents and practices, please refer to NIH’s “Biosafety Considerations for Research with Lentiviral Vectors”.

Restriction: This product is not transferable or re-sellable.  Customer obtain no right to transfer, assign, or sublicense its use rights, or to transfer, resell, package, or otherwise distribute the product, or to use the product for the benefit of any third party or for any commercial purpose.  Customer may only use the product in compliance with applicable local, state and federal laws, regulations and rules.  Customer may not directly or indirectly use the product or allow the transfer, transmission, export or re-export of all or any part of the product in violation of any export control law or regulation of the united states or any other relevant jurisdiction.  Your use of this product constitutes acceptance of the terms of this limited use agreement.  Please refer to our “terms & conditions” for details.  If you are not willing to accept the limitation of this agreement, G&P Biosciences will accept return of the product for a full/partial refund.

 

Transduction Protocol

 

Pre-packaged lentiviral particles are most advanced gene delivery tools. Each particles contain a fully sequence verified target gene and are psudotyped with the VSV-G glycoprotein, ready for transduction into into a wide range of cell types including hard-to-transfect primary cells and non-dividing cells. They are supplied in 1-mL aliquot(s) of the serum-/antibiotic-free solution suitable for both in vitro and in vivo delivery. They are produced in HEK293 packaging cells with a typical titer of ≥107 IFU/ml using our optimized LentPAKTM packaging system. The lentiviral particles can be used to transduce subconfluent target cells. Depending on your purpose, you may choose a specific multiplicity of infection (MOI) or test a range of MOIs to determine which gives you the desired results. Transduction can be enhanced by the addition of polybrene, also known as hexadimethrine bromide (typically at 8-10 μg/ml). 

 

Quick Protocol for Transduction

 

Day 1. Seeding Target Cells

For an example, plate target cells in a 10 cm plate at a density of 1 - 5x 105 cells/ml that will produce approximately 60% confluency in 24 hours.

 

Note: other size plates can also be used depending on the nature of your experiment. Adjust the reagent amount according to Table 1

 

Table 1. Seeding Density of Target Cells (1 day prior to transduction)

 Vessel Type

 Seeding Density

 Volume of Media

 10-cm dish

 1 – 5 x 106

 10 mL

 6-well plate

 0.3 – 1 x 106

 2 mL/well

 12-well plate

 0.15 – 0.5 x 106

 1 mL/well

 24-well plate

 0.6 – 2 x 105

 0.5 mL/well

 96-well plate

 1 – 4 x 104

 0.1 mL/well

  

Day 2. Transduction

Remove the growth media from the dish/plate prepared the day before. Replace with 1/2 volume of culture medium containing desired amount of lentiviral particles (at 2 to 20 MOI).  For example, add 4.5 mL of growth medium and 0.5 mL of Lentiviral particles, or simply add 5 mL of Lentiviral particles (for a low titer viral preparation or a high MOI transduction). Add polybrene directly to the media on the target cells at 8 μg/ml. Mix by gentle swirling.

 

Incubate at 37°C with 5% CO2 for 4 - 24 hours, then replace the transduction medium with right amount of growth medium according to table 1 (for example 10 mL for 10-cm dish). Culture the cells for 48 – 72 hours, and transduced cells are ready for downstream analyses.

 

Note: Adjust volumes accordingly for transduction of other plate types.  For example, add 1 ml of growth medium and lentiviral particle mixture for 6-well plate, 0.5 ml for 12-well and 0.25 mL for 24-well except for 96 well, in which 100 μl should be used. The change of transduction medium is often unnecessary with our pre-packaged lentiviral particles.  Simply culture cells for 3-4 days before analysis. 

 

The virus-containing media can be changed in as short as 4 hours after transduction if toxicity of the lentiviral transduction is a concern. Normally reverse transcription and genome integration of the lentivector takes place within 24-36 hours. With our ready-to-use, prepackaged lentiviral particles, the change of media is often unnecessary. The transduction process can be ongoing for 2 - 6 days without significant impact on cell growth/viability. The transduction process can also be repeated if desired. For a lentivector with a fluorescent reporter (such as GFP), FACS can be used to enrich for cells that express GFP. If it contains a drug selectable marker, follow the protocol for the particular drug. For example, puromycin selection is usually carried out at 1-10 μg/mL, depending on the target cells’ sensitivity

 

 

Important Safety Information

With the safety features in place, our lentiviral vectors and viral particles can be employed in standard Biosafety Level 2 tissue culture facilities and should be treated with the same level of caution as any other potentially infectious agent. Any investigator who purchases our lentiviral/retroviral products & services is responsible for following Biosafety Level 2 requirements on the handling of viral particles. For more information on Biosafety Level 2 agents and practices, please refer to NIH’s “Biosafety Considerations for Research with Lentiviral Vectors”.

 

Storage

 

The product is shipped at 4°C for immediate use.  Upon receipt, centrifuge the vial briefly before opening.  Store at –80°C or lower and the product is stable for 3 months.  Avoid repeated freeze-thaw cycles.

 

 

The product should be employed in a Biosafety Level 2 tissue culture facility.

 

 

 

FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.

 

References

 

 

1. J. Biol. Chem. 267:26181 (1992)

2. Oncogene 13:1555 (1996) 

3. Genomics. 41: 283 (1997).

4. Mol Cell Biol. 21: 8329 (2001).

5. Clin Cancer Res. 14: 396 (2008).

 

 

 

Documentation

 

Product datasheet (pdf) can be downloaded here: LTV0043-PDS.pdf

 

 

 

Additional supporting documents, including COA and MSDS are available upon request.

 

 

 

FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.

 

Molecule Class Receptor Tyrosine Kinase (RTK)
Gene Family Tyrosine Protein Kinase Family; ROR Subfamily
Gene Synonym NTRKR1; dJ537F10.1
Research Area Neuroscience
"A" - "Z" List
R
Pathway/Disease Wnt Signaling Pathway
Species
Human

Search Products

Categories
Molecule Class
Gene Family
Pathway/Disease
Research Area
CD Antigen
"A" - "Z" List
Reset All

Special Offers & Rewards

Promotion

Earn discounts, credits or rewards with your purchases.

Purchase or Clone My Genes

My Gene Clones

Get the sequence-verified, expression-ready gene clones.

Recombinant Proteins

Recombinant Proteins

Oder your high-quality, recombinant proteins of interest.

Recombinant Antibodies

Recombinant Antibodies

Try our products & services for your antibody R&D.

Virus-Based Gene Expression

Virus Gene Delivery

Acquire high titer, ready-to-use viral particles.

Get in Touch with Us

Send your question or feedback on our products & services